01 / INLET
Begin with
your own supply.
Water enters the fixed nozzle under pressure from your existing system. No motor or rotating impeller is required.
WATER STRUCTURING / HOME & AGRICULTURE
Bring water structuring into your daily supply. One inline system for the water you drink, the garden you grow and the crops your business depends on.
Discover the Ultra Imploder ↓GIVE YOUR WATER MORE ATTENTION.
Drinking water. Whole-house systems. Irrigation. The right setup starts with what you need your water to do.
The Ultra Imploder brings Fractal Water’s water-structuring process into your supply: a spiral guide directs the flow, then permanent magnets surround its path. It works inline, using your existing water pressure.
Already considering water filters or reverse osmosis? Structuring has a different role. Keep the filtration your water requires, then assess where this additional stage fits.
Find the right approach for your home ↗THE PROCESS
The shaped nozzle guides water into a spiral before it reaches the magnetic stage.
Permanent magnets surround the flow path. Fractal Water describes this stage as conditioning dissolved minerals to reduce scale formation.
The device uses existing water pressure, with no electricity, conditioning salt or filter cartridges of its own.
02 / INSIDE THE ULTRA IMPLODER
A closer look at the two stages inside one assembly.
01 / INLET
Water enters the fixed nozzle under pressure from your existing system. No motor or rotating impeller is required.
02 / SPIRAL GUIDE
Inside the chamber, curved channels guide the water around the core. The blue path lets you follow this first stage.
03 / THE NOZZLE
The inlet, spiral chamber and short outlet form one continuous passage. Water stays within the device.
04 / THE CONNECTION
The short nozzle outlet joins the magnetic section. There is no separate transfer or dosing step.
05 / MAGNETIC ARRAY
The water continues through a pipe surrounded by permanent magnets. The opened housing reveals where this second stage sits.
06 / BACK TO YOUR SYSTEM
The downstream outlet returns water to the connected supply, ready for the next part of your system.
Water enters the longer inlet under pressure from the existing supply. The fixed spiral guide redirects it inside the nozzle. The nozzle’s short outlet connects to a pipe surrounded by permanent magnets. The downstream outlet returns water to the connected system. This conditioning process needs no dedicated electrical connection or chemical dosing. The model illustrates an inferred internal arrangement; it is not a measured fluid simulation.

03 / FOR GROWING BUSINESSES
Give root development the attention it deserves. Start with the water reaching your crops.
Fractal Water’s published growing work reports differences in germination and root development. For a nursery or farm, those are outcomes worth investigating. Connect a suitable system to your irrigation line and compare performance across a defined growing area before scaling up.
Plan your growing trial ↗BENEFITS ACROSS APPLICATIONS
Fractal Water publishes the following savings and performance claims across its applications.
Irrigation water use.
Fertiliser, pesticide or detergent use.
Pumping and scale-related efficiency.
Harvest output across growing applications.
No added salt or chemical waste stream.
Manufacturer-reported figures, not guaranteed outcomes. Results depend on the application, water and operating conditions; these figures are not findings from the two-plant comparison below. View the published claims ↗
THE SUNFLOWER COMPARISON
We tested the Super Imploder in a 28-day sunflower demonstration. One plant received water treated with our product; the other received regular water. We compared their growth, then lifted both plants to examine the roots. Here is the setup and what the demonstration reported.
Concept illustration · not an image from the trial
01 / SET UP THE COMPARISON
The publisher describes two sunflower seeds grown over 28 days under fluorescent lights on an 18-hour cycle. One received Super Imploder-treated water; the other received regular water.
Concept illustration · not an image from the trial
02 / FOLLOW THE GROWTH
The publisher reports earlier germination in the treated plant, but also describes it as slightly smaller above ground. Height alone does not tell the whole story.
Concept illustration · not an image from the trial
03 / REVEAL THE ROOTS
At the end, the publisher reports more than double the root size in the treated plant. That is a finding from this small demonstration, not a guaranteed result for other crops or the current Ultra Imploder.
Source: Fractal Water’s 2013 Super Imploder demonstration. Two plants; publisher-reported findings, not independently verified here. Generated stills illustrate the sequence and do not establish the size of any effect.
View the original source ↗FOR YOUR HOME

WATER STRUCTURING AT HOME
Install a suitable inline system on your main supply to deliver vortex-treated, magnetically conditioned water around the house. One installation serves the water you use throughout the day.
Find your home system ↗BUILD THE SYSTEM YOUR WATER NEEDS
They serve different purposes. Filters and RO can reduce specific contaminants when correctly selected. Fractal Water uses “structuring” to describe its vortex and magnetic process.
If your goal is cleaner drinking water, start with the contaminants you need to address. Assess structuring as an additional stage, with installation compatibility confirmed.
Discuss your whole-house setup ↗06 / FIND YOUR FIT
Compare the configurations, then confirm compatibility with your pipework and operating conditions.

FLAGSHIP INLINE ASSEMBLY
Spiral nozzle and permanent magnetic array in one connected assembly.
Explore a suitable installation ↗
VORTEX & MAGNETIC
Compare this alternative configuration with the needs of your water system.
Discuss compatibility ↗
THE VORTEX COMPONENT
A standalone nozzle for an appropriate setup or replacement application.
Check your setup ↗
A DIFFERENT FORMAT
Explore the Recharger format and how it is intended to be used.
Ask about the Recharger ↗BEFORE YOU INSTALL
The device uses a fixed nozzle and permanent magnets. It does not require its own electrical connection. Your wider water supply may still depend on a pump.
No. Vortex and magnetic conditioning do not remove contaminants or establish that water is safe to drink. Keep any filtration, disinfection or other treatment your water supply requires.
Start with pipe size, flow rate, operating pressure and the application. Confirm the product specification and installation requirements before ordering.
The evidence reviewed for this draft does not establish that this device improves human health, hydration or wellbeing. “Structuring” is the manufacturer’s term for its vortex and magnetic process; it should not be read as proof of a lasting molecular change or a health outcome.

LET’S START WITH YOUR WATER.
Tell us where you use water and what you want to explore.
For an irrigation enquiry, have your crop, pipe size and approximate flow rate ready.
Private design preview · Enquiry connection to be confirmed with the client.